Skip to main content
Your connection is unprotected
Get 73% Off

Speedcheck – Free Internet Speed Test Online

SpeedCheck is a free, browser-based internet speed test that measures your download speed, upload speed, ping, and jitter in one click — no signup, no app install, no account required. A good home connection delivers 100+ Mbps download, 10+ Mbps upload, and under 50 ms ping. Results run against M-Lab NDT7 and Cloudflare edge nodes for accuracy and finish in roughly 30 seconds.

Fast, private, and accurate — run a professional Speedcheck in seconds.

Click Start Test to run a comprehensive, privacy-first Speedcheck that measures download, upload, and ping while analyzing stability and jitter. Within seconds you'll get a clear result card that explains what your numbers mean for streaming, video calls, and gaming — plus a prioritized troubleshooting plan tailored to your result (ethernet vs Wi-Fi, router fixes, ISP checks). No account required and a one-click report you can download and share with your provider.

Whether you're on a mobile connection, home Wi-Fi, or fiber at the office, the test asks M-Lab's Locate service for nearby measurement servers, compares the candidates by measured connection latency, and then runs parallel streams against the fastest one. Scroll down for benchmarks and an easy step-by-step flow to fix common issues.

If you need a quick answer right now: Start the Speedcheck, we'll interpret the numbers and tell you exactly what to do next.

Internet Speed Test

0125250375500
0.0
Mbps

Ready to test your connection

Ping

0

ms

Download

0.0

Mbps

Upload

0.0

Mbps

Location
Auto (nearest)

Why run a Speedcheck?

You pay for an internet plan, but are you really getting it? A Speedcheck shows how fast your connection is right now, on this device. That helps you:

  • Check whether your provider delivers the speed you pay for
  • Diagnose buffering on video calls or streaming
  • Find out whether Wi-Fi, your device, or the connection itself is the bottleneck
  • Decide if you need a plan upgrade, a new router, or just a few simple fixes

What our Speedcheck measures

Each result card reports separate signals. They describe different things and should not be read as interchangeable:

Download (Mbps)

How quickly you receive data — streaming, downloads, loading pages.

Upload (Mbps)

How quickly you send data — video calls, cloud backups, posting videos.

Ping / idle latency (ms)

Round-trip time while the connection is quiet. Matters most for gaming and real-time apps.

Jitter (ms)

How much consecutive latency samples vary. High jitter causes choppy calls and uneven gameplay.

Latency under load (ms)

How much round-trip time rises while the download or upload is running. A large increase is a bufferbloat indicator.

TCP retransmissions (%)

Share of data the M-Lab server had to re-send during the test. A useful hint for unstable links — but not a direct packet loss measurement.

Example results: what your score might mean

The three results below are illustrative examples, not real measurements. They show how to read a combination of numbers.

Example 1: 8 Mbps download / 0.8 Mbps upload / 80 ms ping

→ Fine for browsing and email, tight for streaming or calls. Try quick fixes first (router reboot, wired test). If wired results stay low, ask your provider to review your line and plan.

Example 2: 45 Mbps download / 5 Mbps upload / 40 ms ping

→ Comfortable for HD streaming and everyday remote work for one or two people. Upload may limit cloud backups or several simultaneous video calls.

Example 3: 200 Mbps download / 20 Mbps upload / 15 ms ping

→ Handles 4K streaming, gaming and work from home for a busy household. If games or calls still lag, check latency under load and jitter rather than download speed.

Quick benchmarks (what good looks like)

Typical planning ranges per activity and device. They are rules of thumb, not official standards — streaming services, game publishers and conferencing apps publish their own requirements. For reference, the U.S. FCC uses 100 Mbps download / 20 Mbps upload as its fixed broadband benchmark.

Typical download, upload and ping ranges by activity
ActivityDownloadUploadPing
Browsing, email & smart home devices5–10 Mbps1–3 Mbps<100 ms
HD streaming (per device)10–25 Mbps1–5 Mbps<100 ms
4K streaming (per device)25–50 Mbps1–5 Mbps<100 ms
HD video calls5–10 Mbps3–6 Mbps<60 ms
Casual online gaming25+ Mbps3–5 Mbps<60 ms
Competitive gaming50+ Mbps5+ Mbps<20–30 ms
Home office + several users100+ Mbps20+ Mbps<50 ms

< 20 ms

Excellent ping — competitive gaming

20–50 ms

Good — gaming and video calls

50–100 ms

Fair — streaming, casual play

> 100 ms

Noticeable delay in real-time apps

Want to know how good your measured result is? Read what is a good internet speed. Planning a plan for your household? Use how many Mbps do I need.

How to run a fair, accurate Speedcheck (30-second checklist)

  1. Use Ethernet for the most reliable reading. Wi-Fi results vary with distance and walls.
  2. Pause large uploads/downloads and stop streaming on other devices.
  3. Close background apps such as cloud backups, torrents and large updates.
  4. Test several times (morning, afternoon, evening) to see congestion patterns.
  5. On mobile, try both Wi-Fi and cellular to compare.

Why different tests give different numbers

  • Server distance and routing: farther servers usually mean lower speeds and higher ping
  • Different test methods: number of parallel streams, test length and data sizes differ between services
  • Load on the test server at that moment can affect peak throughput
  • Your device or browser can be the limit (older network chips, busy CPU, power saving)

Compare results from several runs and services rather than trusting a single number.

Troubleshooting: Action plan by result

Start with the symptom that matches your result. The thresholds are rough orientation points, not fixed limits.

Download is low

  1. Test wired — if speeds jump, Wi-Fi is the problem
  2. Reboot modem and router (power off 30 seconds)
  3. Pause heavy downloads on other devices

Full guide: Why is my internet so slow?

Upload is low

  1. Pause cloud backups and photo sync
  2. Compare a wired test with your plan's upload speed
  3. If wired upload stays well below plan, contact your provider

Run the dedicated upload speed test

Ping is high

  1. Switch to a wired connection
  2. Test with the VPN off and on (VPN effects explained)
  3. If ping stays high on cable, share timestamped results with your provider

Ping test · Good ping for gaming

High jitter or latency under load

  1. Jitter: rule out Wi-Fi interference (try 5 GHz or a cable)
  2. Latency under load: pause other uploads/downloads; router queue management (SQM) settings can help
  3. Frequent TCP retransmissions on a wired test can point to a modem or line issue

Jitter test · How to fix packet loss

Tips by connection type

Cable

Shared neighborhood capacity can slow evenings; upload is usually much lower than download.

  • Make sure your modem supports your plan's speed tier
  • Remove unnecessary coax splitters
  • Check signal levels in the modem's status page

Fiber

Often symmetric plans; the router or Wi-Fi is the most common limit.

  • Use a router and cables rated for your plan
  • Power-cycle the ONT if speeds drop
  • Keep router firmware updated

DSL

Speed drops with the distance between your home and the provider's equipment.

  • Ask whether a faster DSL variant is available
  • Use DSL filters on phone sockets
  • Connect the modem to the main phone jack

Power users: router QoS can prioritize calls and games over file sync, and trying a different DNS resolver can speed up name lookups (it does not change measured bandwidth).

How SpeedCheck measures

  • Protocol: throughput is measured with NDT7, the open protocol published by Measurement Lab (M-Lab), over encrypted WebSocket connections in your browser.
  • Server selection: nearby measurement servers are requested from M-Lab's Locate service, compared by measured connection latency, and the fastest one is used.
  • Parallel streams: two concurrent streams run in web workers for download and upload.
  • Latency: an idle baseline is taken before the transfer; round-trip time is sampled again during download and upload to report latency under load. Jitter is the variation between latency samples.
  • Server-reported TCP data: M-Lab returns TCP statistics, including retransmitted segments.
  • Fallback: if M-Lab servers are unreachable, the test uses Cloudflare's public speed endpoints.

SpeedCheck is an independent, ad-supported project. We do not claim certifications, lab partnerships or affiliations we do not have. Questions? Use our contact page.

Privacy & connection security

  • No account required; nothing to install
  • Results are shown in your browser and kept in local storage only — we do not store them on our own servers
  • Analytics and ads load according to your consent settings
  • Measurements run through M-Lab NDT7, which records the client IP together with the measurement data and publishes it in M-Lab's public dataset
  • All measurement connections use HTTPS / secure WebSockets on standard web ports

Details in our privacy policy and the M-Lab privacy policy.

Ready to Test Your Connection?

Click Start Test and get your result with a plain-language explanation in under a minute.

Start Test Now

Frequently Asked Questions

Everything you need to know about internet speed tests and wifi speed testing

Our comprehensive FAQ section covers troubleshooting tips, technical explanations, and guidance for optimizing your internet connection.

What is SpeedCheck and how is it different from Speedtest?

SpeedCheck (speed-check.net) is a free, browser-based internet speed test that measures download, upload, ping and jitter in one click. It runs entirely in your browser, with no app install and no signup. Throughput is measured with the open M-Lab NDT7 protocol, with Cloudflare edge endpoints as a fallback.

Is speed-check.net the same as speedcheck.net?

They are two different services. SpeedCheck on speed-check.net is an independent speed test focused on browser-based measurement with no signup required. Bookmark speed-check.net (with the hyphen) to reach the SpeedCheck tool.

How long does a speed test take?

A full test usually finishes in under a minute: a short latency check, then roughly 10–15 seconds each for download and upload.

How accurate is this speed test?

The test runs the open NDT7 protocol against M-Lab measurement servers using parallel WebSocket streams. It measures the speed available to this device and browser at this moment, so Wi-Fi, an older device or other traffic on your network can lower the result. A wired test repeated a few times gives the most reliable reading.

What is the difference between ping, jitter and latency under load?

Ping (idle latency) is the round-trip time while your connection is quiet. Jitter is how much consecutive latency samples vary. Latency under load is how much the round-trip time rises while the download or upload is running — a large increase is a bufferbloat indicator and often explains lag during video calls or gaming even on fast plans.

Does SpeedCheck measure packet loss?

Not directly. The result shows TCP retransmissions reported by the M-Lab server — the share of data that had to be re-sent during the test. Frequent retransmissions often point to Wi-Fi interference or a line problem, but they are not the same as the packet loss a game or call would see. For a focused check, use the jitter test and our packet loss guide.

Why is my speed lower than my ISP plan?

Plans are usually sold as maximum or typical speeds. Wi-Fi, router placement, older devices, background downloads and evening congestion can all lower a test. Run several wired tests at different times; if wired results stay well below your plan, share the results with your provider.

Does a VPN affect my speed test?

Usually yes. A VPN adds encryption and an extra hop, which can lower throughput and raise ping. Test once with the VPN off and once with it on to see its effect on your connection.

Does SpeedCheck store my personal data?

SpeedCheck does not require an account and does not store your test results on our own servers — your test history stays in your browser's local storage. Analytics and advertising technologies are only loaded according to your consent settings. Measurements run through M-Lab NDT7: M-Lab records the client IP address together with the measurement data and publishes it in its public research dataset. Details are in our privacy policy and in M-Lab's privacy policy.

How often should I test my internet speed?

Test at different times of day — morning, evening and late night — to spot congestion patterns. Retest after changing your router, plan or Wi-Fi setup, or whenever streaming, calls or games start to struggle.